SgneepBox
Requirements:
Board:Raspberry Pi3B
UsbKey 64Gb
File Type:
Image file: .bin
OS : Debian 10
( Step 1 )from this page download SgneepBox in .zip format
( Step 2 ) Unzip downloaded file in your preffered folder
( Step 3 )Burn the .bin file in USB Drive with ImageUsb (download from official website)
TIPS: "ImageUSB by PassMark" not check image dimension
( Step 4 ) Enjoy!
!!Important!!
[1] SgneepBox work only in RaspberryPi3 with boot from usb enabled
[2] use properly sized cables and power, or sgneepBox jeOS will run very slow.
Tutorial:
Enable Usb Boot